250 ml PET bottle 24/410
product unavailable
-
ask about product
-
recommend to a friend
-
Masz jakieś pytania?
Skontaktuj się z nami
694305060
250 ml 24/410 PET bottle is a colourless, transparent container with a cylindrical CR (Cylinder Round) shape and a round base, designed for use with, amongst other things, cosmetics, skincare products and household goods. The transparent body allows the colour and level of the contents to be clearly seen. The 250 ml cosmetic bottle is 170 mm high, 48 mm wide and weighs 25 g. The product is sold without a closure. The 24/410 thread allows you to select a suitable closure or dispenser, e.g. a pump, atomiser, flip-top, disc-top, applicator or cap. This means that the 24/410 threaded bottle can be configured according to the intended method of application. This transparent PET packaging for cosmetics can be used, amongst other things, for toners, hydrosols, balms, lotions, oils and gels.
Description
250 ml PET bottle – key product information
The 250 ml PET bottle is a colourless, transparent container with a cylindrical CR (Cylinder Round) shape and a round base. The body is 170 mm high, 48 mm wide and weighs 25 g. The transparent walls allow the contents to be seen from the outside, so you can observe its colour and current fill level. The 250 ml PET container features a 24/410 threaded neck, whilst the bottle itself is sold without a closure. The method of closure and dispensing can therefore be selected separately to suit the type of product and the intended method of application. This could be a suitably matched pump, atomiser, flip-top, disc-top, applicator or a classic screw cap. The 24/410-threaded bottle does not impose a single mechanism for dispensing the contents. The 250 ml capacity makes this option suitable, amongst other things, as a cosmetic bottle for toners, hydrosols, balms, cleansing milks, oils, gels and other products that meet the packaging’s specifications.
PET bottle – material and its characteristics
The body of the PET bottle is made from colourless, transparent PET plastic. A key feature of the material in this variant is the transparency of the walls, which allows the contents to remain visible from the outside. This enables the colour and current fill level to be observed without having to open the packaging. In the 250 ml PET container, the transparent material is combined with a cylindrical CR shape and a round base. The transparent body can be complemented by a label, the product name and other markings designed for the finished packaging, whilst the unprinted areas of the surface continue to showcase the contents. The transparent PET bottle thus allows the appearance of the product inside to be used as part of the product’s presentation. When used as a PET bottle for cosmetics, this may include, amongst others, toners, hydrolates, lotions, milks, oils and gels. However, the body material does not determine the method of application – the dispensing function is handled by a separately selected cap or an applicator fitted to the 24/410 neck.
Design and method of use of the 250 ml cylindrical bottle
The 250 ml cylindrical bottle has a CR (Cylinder Round) shape, a regular body and a round base. It is 170 mm high and 48 mm wide, whilst the weight of the packaging itself is 25 g. The cylindrical design creates a uniform side surface which can be used to display the label, product name and other markings required for the finished packaging. The upper part of the 24/410-threaded bottle consists of a neck designed for the mechanical connection of the body to a suitably selected closure or dispensing system. The 250 ml bottle itself is supplied without a closure, so its final use depends on the component fitted to the neck. This could be a pump, atomiser, flip-top, disc-top, applicator or cap. The body is responsible for storing and presenting the contents, whilst the selected component determines how the product is accessed and applied. The design therefore allows the bottle body and the dispensing mechanism to be selected separately, depending on the requirements of the specific product.
Method of dispensing from a 24/410 PET bottle
The 24/410 PET bottle is sold without a closure, which is why the body itself does not have a single specific dispensing mechanism. The method by which the contents are dispensed depends on the component fitted to the threaded neck. When fitted with a suitable atomiser, a 24/410 bottle with an atomiser can be used to spray the contents, such as toner or hydrolate. With a suitably selected pump, the product is drawn from inside the container and dispensed by pressing the pump mechanism, which can be used, for example, with lotions and emulsions. Flip-top and disc-top closures, on the other hand, allow access to the product through an opening in the closure. Another option is the 24/410 bottle with an applicator, where the method of application depends on the design of the specific applicator. The choice of system therefore allows the method of using the cosmetics bottle to be tailored to the intended method of application. However, each specific closure must be verified on a case-by-case basis to ensure compatibility with that particular bottle body model and the properties of the product to be contained within the packaging.
24/410 threaded bottle – closure and connection method
The neck of the 24/410 threaded bottle is designed for mechanical connection to a suitably selected closure or dispensing element. The 24/410 designation identifies the thread standard used in this body variant and is one of the parameters taken into account when assembling the finished packaging. The bottle is sold without a closure, so a pump, atomiser, flip-top, disc-top, applicator or standard cap must be selected separately. Depending on the chosen solution, the 24/410 closure may be used solely to seal the opening or may also serve to draw up, dispense or apply the contents. In the case of a PET bottle with a 24/410 thread, the selected component is fitted onto the threaded neck of the bottle. When putting together a set, however, you should check that the specific closure is compatible with this bottle model. The 24/410 designation alone does not automatically guarantee that every component of this standard will work correctly with every bottle body. The selection should therefore be based on the specific combination of bottle and chosen closure.
250 ml bottle – capacity, dimensions and specifications
The 250 ml bottle has a nominal capacity of 250 ml, a height of 170 mm, a width of 48 mm and a weight of 25 g. The body has a cylindrical CR (Cylinder Round) shape and a round base. Combining these parameters allows the size and proportions of a specific variant to be determined and compared with other packaging units of different capacities or designs. The height of 170 mm describes the vertical dimension of the bottle, whilst the width of 48 mm defines the dimension of its cylindrical body. In the case of 250 ml packaging, these values must be taken into account, amongst other things, when planning the size of the label, the method of display and the space allocated for the finished product. The weight of 25 g refers to the body alone and therefore does not include the selected cap or the contents inside. The 250 ml PET bottle also features a 24/410 threaded neck, which is important when assembling a capping or dispensing system. When selecting this variant, it is therefore necessary to consider the capacity, dimensions, cylindrical shape and neck standard as a whole, as these parameters identify a specific model of bottle with a 24/410 thread.
Safety
€0.23
net: €0.19
€0.19
net: €0.15
Related products
250 ml HDPE bottle 24/410
Net price: €0.32
Black 250 ml PET bottle 24/410
Net price: €0.22
Soft, flexible 250 ml LDPE bottle, 24/410 neck finish
Net price: €0.32
Branże i zastosowania